Flake systems for shops and bays
A full-broadcast flake floor gives texture underfoot and hides dirt and wear between cleanings, which makes it a common choice for service bays, shops and back-of-house areas.
Shops · Service bays · Warehouses · Showrooms
Commercial and shop floor coatings in Newnan, GA
Seamless, easy-to-clean coated floors for shops, service bays, warehouses, showrooms and retail spaces, planned around your operating hours.
We take care of everything: the measured quote, scheduling and the final walkthrough with you.
Who it's for
For floors that work for a living
Bare concrete in a working space soaks up oil and fluids, sheds dust onto inventory and equipment, and never looks clean no matter how often it is swept. A coated floor seals the surface, so spills wipe up, the space looks brighter and daily cleanup takes less effort.
We quote coatings for auto and equipment service bays, fabrication and woodworking shops, warehouses and storage areas, showrooms, retail floors, offices and detached shops on larger home properties. The system is matched to what the floor actually faces: rolling loads, hot tires, chemicals, water or foot traffic.
- Auto, equipment and service bays
- Warehouses and storage areas
- Showrooms, retail and office floors
- Detached and backyard shops
Options
Matching the system to the floor
Commercial floors are specified, not picked off a color chart. These are the main choices in a scope.
Metallic floors for showrooms
Where customers see the floor, a metallic finish adds a polished, high-end look for showrooms, salons, offices and retail spaces.
Texture, joints and transitions
Slip-resistant texture, how control joints and saw cuts are treated, and transitions at doors and bay edges are planned in the scope, not left for install day.
Prep & process
How a commercial floor project works
Site visit
We look at the slab, traffic, chemicals, drains and moisture, and ask how the space is used day to day.
Written scope & schedule
Your quote lists prep, repairs and the coating system, and the work is planned around your hours, including slower days when the job allows.
Prep & repair
The floor is diamond ground, cracks and spalls are repaired and joints are addressed so the coating bonds well.
Coating & handover
The system goes down in one push or in phases, depending on your plan. We walk it with you and confirm when it is ready for foot, cart and vehicle traffic.
What to expect
Planning around your business
- Downtime is planned, not guessed. Coatings need time to cure before traffic returns, and that time depends on the system, temperature and humidity. We build the schedule with you, and larger spaces can sometimes be done in phases.
- The floor must be cleared. Racks, equipment and inventory need to come off the area being coated. The scope notes what has to move.
- Tell us what the floor faces. Forklifts, jacks, hot tires, solvents, brake fluid and standing water each affect which system is right. The more we know, the better the match.
- Kitchens are different. Food service areas with hot water and grease usually need a heat-rated system. See commercial kitchen floors.
The honest part: slab moisture, heavy contamination and failing old coatings are the most common reasons commercial floors fail. We look for them during the site visit and tell you what they mean for your project before you commit.
Example finish
What a coated shop floor looks like
This stock photo shows a seamless, high-gloss coated floor in a large warehouse. Send photos of your space with your quote request and we will tell you what we see.
Local
Commercial floors in Newnan, Coweta and Fayette County
The Newnan area mixes busy retail corridors, light industrial space and a growing number of businesses run out of detached shops. Each has different floor needs, from customer-facing finishes to hard-working bays.
We take commercial and shop floor requests across Newnan, Senoia and Sharpsburg in Coweta County, plus Peachtree City, Fayetteville and Tyrone in Fayette County. Tell us your ZIP code and the type of space in the quote form.
FAQ
Commercial and shop floor questions
Can you work around our business hours?
In many cases, yes. We plan the schedule with you, and depending on the size of the space and the system, work can be phased or planned for slower days. The written quote confirms what is realistic for your floor.
Which coating is right for a shop or service bay?
It depends on what the floor faces. Hot tires, jacks, fluids and chemicals call for a durable, textured system, and a full-broadcast flake floor is a common choice. Tell us about the work done in the space and we will recommend a system in your quote.
Can you coat over an old, peeling floor coating?
Usually the old coating has to come off. New coatings need to bond to clean, ground concrete, so failing coatings are removed as part of the prep. Your quote spells out what comes up and why.
Is a coated floor slippery when wet?
Smooth coatings can be. For work areas that get wet or oily, texture is added to the system to improve footing. Let us know where water, oil or ice melt ends up so we can plan for it.
Do you coat restaurant and commercial kitchen floors?
Yes, but kitchens usually need a different system. Hot water, steam and grease call for heat-rated urethane cement rather than standard epoxy. See commercial kitchen floors.
How do I get a quote?
Use the quote form or call 404-941-4475. Share the type of business, the rough square footage, what the floor faces day to day and a few photos.